Skip to main content

Blyott Platform - Mobile App Manual - Knowledgebase / Blyott Manuals - Blyott Support & Assistance

Blyott Platform - Mobile App Manual

Authors list



MOBILE APP REQUIREMENTS


1/ HARDWARE REQUIREMENTS

Works only on Android and iOS smartphones and requires built-in Camera and NFC Reader.

 

2/ SOFTWARE REQUIREMENTS

Download the “Blyott Platform” mobile app via the Google Play store or the Apple App store. Or via a download link we may have sent to you.

 

3/ USER CREDENTIALS

In order to use our mobile app you need your “Blyott Platform” credentials. Contact your administrator in case you don’t have these credentials.




TAGS & ASSETS

1/ TAGS

Tags” are Bluetooth (BLE) tags which are fixed to an “Asset”. Our tags have either a built-in NFC chip or a printed QR code representing their unique “Tag ID”.

 



2/ ASSETS

Examples are e.g. beds, pumps, monitors, … you want to locate. Via the Blyott Platform you can upload your list of assets. Each asset has its unique “Asset Code” which is also printed on the asset as e.g. a barcode or QR-code.




LOG-IN & MAIN MENU

LOG IN

Using your credentials. Click on “Remember Me” in order to save your credentials.

MAIN MENU

Dependent on your user profile (e.g.“Admin”, “User”) you will see more or less main menu items. Scroll down the page to log-out.





SEARCH ASSET

SEARCH ASSET

Enter the asset name or serial number or … of the asset you want to locate.

ASSET DETAILS

Based upon your search request, you will see a list of results. Click on the asset you want to locate.

RADAR

You don’t see the asset you’re looking for? Click on the “Radar” function to see how far away you’re from the selected asset.

UNLINK ASSET

Only available to Administrators. To “Unlink” a Bluetooth tag from an asset, e.g. when you need to replace a Bluetooth tag.






LINK ASSET

ENTER TAG AND ASSET DETAILS

Enter the unique “Tag ID” and “Asset Code” manually or either by reading the NFC tag or scanning the barcode. The MAC address of an asset should be entered without “:” semicolons.

ASSET TYPE

Is standard “Mobile”. Select “Fixed” when the asset is located in one specific location and is not supposed to move; next enter or scan via OCR the location ID.

HARDWARE MODEL

Select the hardware model of the tag. Not sure which model? Select “Unknown”.

LINK ASSET

Click on “Link Asset” to link the tag to the asset. In case the asset is not yet created on the SHP, you will be prompted to enter an asset name.






CHECK ASSET & RADAR

CHECK ASSET

Not sure if the right tag is fixed to the right asset? Enter the unique “Tag ID” and “Asset Code” manually or either by reading the NFC tag or scanning the barcode. And click “Check” to see if both have been linked correctly.

BROADCASTING

Want to see how many assets are around you? Click the Radar button on the main menu and wait a few seconds as your phone will start looking for assets in its immediate vicinity.





FINGERPRINTING

START FINGERPRINTING

With the “Fingerprinting” feature we teach our “Machine Learning” algorithm the Bluetooth signal “characteristics” for your current location, this in order to increase location accuracy. Make sure you entered the Bluetooth MAC address of your device via “Settings”. Enter or OCR the “Location ID” of the location you want to train. And check via support@blyott.com if “Fingerprinting” is enabled for your location.

RADAR

Once “Fingerprinting” is in progress, walk in the specific location for at least 30s. Don’t leave this location when “Fingerprinting is in progress”!





If you have any questions or suggestions at all, please feel free to get in touch with us HERE!


Thanks and regards,

The Blyott Support Team

www.blyott.com  I  support@blyott.com  I  support.blyott.com  

Helpful Unhelpful

Share